Audi A2 car is conceptualized as a renewal of the A1, with many shapes made of aluminum, 70 mm higher than a three-door hatchback which comprises as in A1. Audi A2 3.8 meters in length, 1.69 meters wide and 1:49 m high (thus the Audi A2 has the form of a shorter length of 18 mm and 50 mm narrower).
Audi A2 car provides seating for four passengers, and has a cabin that can be quite large (due to his cabin floor is made flat), plus the slim design of chairs. For the middle seat can be folded towards the front. There is a concept that puts the center section parallel to the steering gears. To the top of the glass roof was dark, but can be changed to be transparent with certain key facilities provided by the interior of the Audi A2.
The dynamic light is also located in the cockpit area of the show car, structured in two separate arches. Like the entire interior, the dash panel has a light and clean look and intuitive controls. The driver manages many important features via touch-control areas on the inside of the steering wheel. All driving function use by-wire technology. Components such as the steering or brakes, for example, are actuated purely electrically. Two additional control surfaces fold up at the driver’s right when starting the vehicle. An open profile serves as the steering column; a seven-inch display and two secondary displays are located at its end.
The Audi A2 concept has a flat interior floorboard. The center console is attached to the driver’s seat; the rear console extends forward between the two rear seats. The four individual seats add lightness, and there is storage space under the fold-up seat cushions. There is room between the rear seats for a city bicycle with its front wheel removed. The load area has two levels; a frame with functional nets creates the upper level.
